home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Gold Medal Software 1
/
Gold Medal Software Volume 1 (Gold Medal) (1994).iso
/
graphics
/
tierra40.arj
/
DOC
/
BEAGLE.DOC
< prev
next >
Wrap
Text File
|
1992-09-11
|
28KB
|
623 lines
====== BEAGLE DOCUMENTATION =================================================
How to use Beagle:
Beagle runs only on DOS based computers with VGA or CGA graphics cards.
Beagle will search for the cga.bgi or egavga.bgi files that come with the
Borland compilers. If you don't have these, you need to get them, they
have been placed in the directory with the executable and this file.
Beagle reads the files that are written to disk by the Tierra simulator,
and displays them graphically. Beagle reads the break.1 ... break.X files
that are written to the /td directory, and it also reads the 00XX.gen files
that are written to the /gb directory.
====== BEAGLE ===============================================================
Start Beagle by typing beagle to the DOS prompt:
C> beagle
From the top level menu, use cursor keys to select an option, then
use the Enter key to activate that option.
====== PREPARE - RUN INFO ===================================================
You must process the break.X files with the "Prepare - Run Info"
option from the Beagle menu, or the stand-alone run_info utility, which
produces output files called run_info and run_info.g which are used by Beagle:
select the Prepare option
then select the Run Info option
Selecting the "Prepare - Run Info" option will produce a window that
looks like this:
+tierun------------------------------------+
| directory = c:\tierra\td |
| input file = break.1 |
| update frequency = 100 |
+------------------------------------------+
Within this window, use the cursor key to move to an option, then type
in your choice. When you have all the options as you want them, use Ctrl-Enter
to activate the "Prepare - Run Info" process. Use the Escape key to exit from
the window.
An explanation of these "Prepare - Run Info" options follows:
directory = c:\tierra\td
This is the path to the file containing the birth and death records
output by the Tierra program (the break.X files).
input file = break.1
This is the name of the file containing the birth and death records
output by the Tierra program. In long runs, a series of these files may be
produced, with the names break.1, break.2, break.3, ..., break.X. The
Prepare - Run Info program will read each of them in turn, if you specify
the name of the first one.
update frequency = 100
The "Prepare - Run Info" will preview the entire record of births and
deaths in order to rank all the size and genotype classes by their relative
abundances. If the "update frequency" option is non-zero, there will be two
rankings. One ranking will be for the entire run. Another ranking will occur
repeatedly throughout the run, at the frequency indicated by this option
(measured in millions of instructions, the default is to rank the classes
every 100 million instruction). I suggest you leave the update frequency
at 100.
Start the "Prepare - Run Info" option running by hitting Ctrl-Enter.
When the program finishes, go back to the main menu by hitting the Escape key.
When the "Prepare - Run Info" option is finished, you can go ahead and use
the Bar and Trace displays. To use the Bar and Trace displays in the future,
you do not have to repeat the Prepare process (you Prepare once for each
output file).
The "Prepare - Run Info" option uses a lot of memory. On long runs,
it may run out of memory. If this happens, you should use the stand-alone
run_info tool. It takes the same input parameters, but by not being bundled
with the rest of the Beagle tools, it has a lot more memory to spare. Just
type run_info to the DOS prompt.
====== BARS ================================================================
The Bars option will display a running frequency distribution of up
to 55 size or genotype classes simultaneously, in the form of a moving bar
graph.
Selecting the Bars option generates a window that looks like this:
+bars----------------------------+
| directory = c:\tierra\td |
| input file = break.1 |
| x-axis (pop,inst) = inst |
| separate genotypes = Y |
| update display = Y |
| view run_info = N |
| num bars (24,55) = 24 | * this line appears only with VGA display
+--------------------------------+
Within this window, use the cursor key to move to an option, then type
in your choice. When you have all the options as you want them, use Ctrl-Enter
to activate the Bars display. Use the Escape key to exit from the Bars option.
While the display is running, hitting the "p" key will cause the display
to pause. Hitting any key while the display is paused will cause the display
to resume. Hitting the Escape key while the display is running will cause the
display to stop, hitting the Escape key a second time will terminate the
display and return to the option window. If the "g" key is hit while the
display is running, or when it has terminated but is still displayed, the
image on the screen will be saved to a .gif file. When the display is
complete, the machine will beep; hitting the Escape key will return to the
option window.
An explanation of the Bars options follows:
directory = c:\tierra\td
This is the path to the file containing the birth and death records
output by the Tierra program (the break.X files).
input file = break.1
This is the name of the file containing the birth and death records
output by the Tierra program. In long runs, a series of these files may be
produced, with the names break.1, break.2, break.3, ..., break.X. The
Bars program will read each of them in turn, if you specify the name of the
first one.
x-axis (pop,inst) = inst
This item gives you two options for how the horizontal scale is defined.
"pop" means that the horizontal scale specifies the population of each class
of creature. "inst" means that the horizontal scale specifies how much memory
(measured in instructions) is occupied by each class of creature.
separate genotypes = Y
This options allows you to decide if the bars will represent unique
genotypes (Y) or only distinct size classes (N).
update display = Y
The "Prepare - Run Info" option ranked all the size and genotype classes
by their relative abundances, through the whole run, and for every period
indicated by the update frequency. The Bar option will display up to 55 bars
(see the "num bars" option below). The bars displayed will be only the most
abundant size or genotype classes. If the "update display" option is selected
(Y), the list of bars will be updated at the frequency selected during the
"Prepare - Run Info" process. If the "update display" option is not
selected (N), the list will not be updated throughout the run.
view run_info = N
If the option is selected (Y), a window will appear that displays a
summary of the information contained in the relevant run_info file. The
contents and format of the display will depend on the other options chosen
in this window (try it and see).
num bars (24,55) = 24
This option will only appear if you have a VGA display. On a CGA display,
it is only possible to display up to 24 bars. However, on a VGA, it is
possible to display up to 55 bars. You may specify any number of bars you
choose, up to the limit of your display. On a VGA, if you choose up to 24
bars, they will be wide and have large labels. If you choose from 25 to 55
bars, they will be narrow and have small labels.
====== TRACE ===============================================================
This option will produce a phase diagram, illustrating the relative
abundances of two size or genotype classes over time, as an x,y plot.
Selecting the Trace option generates a window that looks like this:
+trace---------------------------+
| directory = c:\tierra\td |
| input file = break.1 |
| x size = 80aaa |
| y size = 45aaa |
| axis (pop,inst) = pop |
| shrink factor = 1 |
| separate genotypes = Y |
+--------------------------------+
Within this window, use the cursor key to move to an option, then type
in your choice. When you have all the options as you want them, use Ctrl-Enter
to activate the Trace display. Use the Escape key to exit from the Trace
option.
While the display is running, hitting the "p" key will cause the display
to pause. Hitting any key while the display is paused will cause the display
to resume. Hitting the Escape key while the display is running will cause the
display to stop, hitting the Escape key a second time will terminate the
display and return to the option window. If the "g" key is hit while the
display is running, or when it has terminated but is still displayed, the
image on the screen will be saved to a .gif file. When the display is
complete, the machine will beep; hitting the Escape key will return to the
option window.
An explanation of the Trace options follows:
directory = c:\tierra\td
This is the path to the file containing the birth and death records
output by the Tierra program (the break.X files).
input file = break.1
This is the name of the file containing the birth and death records
output by the Tierra program. In long runs, a series of these files may be
produced, with the names break.1, break.2, break.3, ..., break.X. The
Trace program will read each of them in turn, if you specify the name of the
first one.
x size = 80aaa
The size or genotype class to be plotted on the x axis.
y size = 45aaa
The size or genotype class to be plotted on the y axis.
axis (pop,inst) = pop
This item gives you two options for how the horizontal axes are defined.
"pop" means that the axes specify the population of each class of creature.
"inst" means that the axes specify how much memory (measured in instructions)
is occupied by each class of creature.
shrink factor = 1
The axes will normally fill the whole screen, but if you use a shrink
factor of less than 1, the y axis will shrink to fill only part of the screen.
This option was introduced to get the display to fit a device that was
cropping the vertical dimension (when making a video tape).
separate genotypes = Y
This options allows you to decide if the axes will represent unique
genotypes (Y) or only distinct size classes (N).
====== DIVERSITY ===========================================================
This option provides a graphical display of the output from the
DIVERSE.EXE program (see the diverse.doc file). The DIVERSE.EXE program
generates files containing indices of diversity and turnover throughout a
run. The Diversity option displays these indices. You must run the
DIVERSE.EXE program before you can use the Diversity option.
Selecting the Diversity option generates a window that looks like this:
+diversity---------------------------+
| directory = c:\tierra\td |
| x var = Time |
| y var = GenoDiv |
| data file = divdat.1 |
| range file = divrange |
| shrink factor = 1 |
+------------------------------------+
Within this window, use the cursor key to move to an option, then type
in your choice. When you have all the options as you want them, use Ctrl-Enter
to activate the Diversity display. Use the Escape key to exit from the
Diversity option.
While the display is running, hitting the "p" key will cause the display
to pause. Hitting any key while the display is paused will cause the display
to resume. Hitting the Escape key while the display is running will cause the
display to stop, hitting the Escape key a second time will terminate the
display and return to the option window. If the "g" key is hit while the
display is running, or when it has terminated but is still displayed, the
image on the screen will be saved to a .gif file. When the display is
complete, the machine will beep; hitting the Escape key will return to the
option window.
An explanation of the Diversity options follows:
directory = c:\tierra\td
This is the path to the file containing the diversity indices, output
by the diverse.exe program (the divdat.X and divrange files).
x var = Time
y var = GenoDiv
These options allow you to choose which two, of the eight indices
output by the Diverse program, you wish to display in your graphical x,y
display. When you move to these lines in the window, a menu of options will
pop up:
+---------+------------------------------+
| Time | elapsed time in instructions |
| NumCell | number of cells |
| NumSize | number of sizes |
| SizeDiv | size diversity |
| AgeSize | average age of sizes |
| NumGeno | number of genotypes |
| GenoDiv | genotype diversity |
| AgeGeno | average age of genotypes |
+---------+------------------------------+
To select a parameter, cursor to that line and hit Enter. Below, a
more technical explanation of some of these parameters is provided:
NumCell | number of cells: total number of adult cells living
in the soup.
NumSize | number of sizes: total number of distinct size classes
of adult cells living in the soup.
SizeDiv | size diversity: (- sum of p * log(p)), where p is the
proportion of all adult cells in the soup that fall in
a size class.
AgeSize | average age of sizes: whenever a new size class appears
or reappears, its age starts counting at zero. At each
instant of time, the age of all size classes is summed
and divided by the number of size classes.
NumGeno | number of genotypes: total number of distinct genotype
classes of adult cells living in the soup.
GenoDiv | genotype diversity: (- sum of p * log(p)), where p is the
proportion of all adult cells in the soup that fall in
a genotype class.
AgeGeno | average age of genotypes: whenever a new genotype class
appears or reappears, its age starts counting at zero.
At each instant of time, the age of all genotype classes
is summed and divided by the number of size classes.
data file = divdat.1
This is the name of the file containing the diversity indices
output by the Diverse program. In long runs, a series of these files may be
produced, with the names divdat.1, divdat.2, divdat.3, ..., divdat.X. The
Diversity option will read each of them in turn, if you specify the name of
the first one.
range file = divrange
This is the name of the file containing the ranges of the diversity
indices, output by the Diverse program.
shrink factor = 1
The axes will normally fill the whole screen, but if you use a shrink
factor of less than 1, the y axis will shrink to fill only part of the screen.
This option was introduced to get the display to fit a device that was
cropping the vertical dimension (when making a video tape).
====== TEMPLATE ============================================================
This option provides a display of the structure of a genome, as
indicated by the arrangement of instructions using templates. Since all
instructions that affect the control flow of the program (jump, call) use
templates, this provides a sort of schematic of the program structure.
The Template option will read and display genomes from the genebank.
You will need to know what genome are stored there. Use the arg t option
to get a list of the genomes stored in any of the .gen files in the genebank:
e.g.: arg t 0080.gen
will produce a list of the genotypes in the 80 size class in the 0080.gen
file.
Selecting the Template option generates a window that looks like this:
+templates--------------------------+
| genebank path = c:\tierra\gb |
| genefile name = 0080.gen |
| genotype = aaa |
| min temp size = 3 |
+-----------------------------------+
Within this window, use the cursor key to move to an option, then type
in your choice. When you have all the options as you want them, use Ctrl-Enter
to activate the Template display. Use the Escape key to exit from the
Template option.
An explanation of the Template options follows:
genebank path = c:\tierra\gb
This is the path to the genebank, where the files containing the saved
genomes of the creatures are written by the Tierra program (XXXX.gen,
XXXX.tmp, XXXX.mem files).
genefile name = 0080.gen
This is the name of the file in the genebank containing the genomes of
the size that you want to examine.
genotype = aaa
This is the actual genotype name of the creature that you want to examine,
of the size indicated by the name of the genefile.
min temp size = 3
You might want to ignore templates below a certain size. There is a
MinTemplSize parameter in the soup_in file used by the Tierra simulator.
Templates below this size are not recognized as templates. You should set
min temp size to the same value as was set in the soup_in file of the run
that produced the genome you are examining.
When you run the Template program by hitting Ctrl-Enter, you will get
a window that looks like this (for 0080aaa):
+-------------------------+
| locus: 9, adrb 0000 |
| locus: 16, adrf 0001 |
| locus: 28, call 0011 |
| locus: 34, jmp 0010 |
| locus: 54, jmp 0100 |
| locus: 61, jmp 0101 |
+-------------------------+
The second column (numbers) contains the position in the genome of the
instructions using templates. The third column contains the names of the
instructions at those positions that use the templates. The fourth column
contains the actual templates used by the instructions at those positions.
====== PROBE ===============================================================
This option allows you to compare two genomes by probing the sequence of
one with the sequence of the other. Probe slides the probe sequence along
the genome sequence and determines the positions of the major alignments.
These alignments are then reported to you, and you may choose how many you
want to recognize. Then the two genomes are displayed together, in their
alignments, with the differences highlighted. The Probe program makes a
heroic effort to deal with complications like multiple allignments, insertions
and deletions, and overlaping alignments. However, it fails miserably for
some of the more complicated cases (the ability to detect insertions or
deletions may not be working). This program is not mature, but it
provides some help in comparing sequences.
The Probe option will read and display genomes from the genebank.
You will need to know what genome are stored there. Use the arg t option
to get a list of the genomes stored in any of the .gen files in the genebank:
e.g.: arg t 0080.gen
e.g.: arg t 0045.gen
will produce a list of the genotypes in the 80 size class in the 0080.gen
file, and in the 45 size class in the 0045.gen file.
Selecting the Probe option generates a window that looks like this:
+probe----------------------------+
| genome path = c:\tierra\gb |
| genome file = 0080.gen |
| genome = aaa |
| probe path = c:\tierra\gb |
| probe file = 0045.gen |
| probe = aaa |
+---------------------------------+
Within this window, use the cursor key to move to an option, then type
in your choice. When you have all the options as you want them, use Ctrl-Enter
to activate the Probe display. Use the Escape key to exit from the
Probe option.
An explanation of the Probe options follows:
genome path = c:\tierra\gb
This is the path to the genebank, where the files containing the saved
genomes of the creatures are written by the Tierra program (XXXX.gen,
XXXX.tmp, XXXX.mem files).
genome file = 0080.gen
This is the name of the file in the genebank containing the genomes of
the size that you want to examine.
genome = aaa
This is the actual genotype name of the creature that you want to compare
to the probe, of the size indicated by the name of the genome file.
probe path = c:\tierra\gb
This is the path to the genebank, where the files containing the saved
genomes of the creatures are written by the Tierra program (XXXX.gen,
XXXX.tmp, XXXX.mem files).
probe file = 0080.gen
This is the name of the file in the genebank containing the genomes of
the size that you want to examine.
probe = aaa
This is the actual genotype name of the probe that you want to slide
along the genome indicated by the first three options, (size indicated by the
name of the probe file).
When you run the Probe program by hitting Ctrl-Enter, you will get
a window that looks like this (for 0080aaa and 0045aaa):
+----------------------------------------------+
| position: 0 fit: 44 diff: 0 idpos: 0 |
| position: -1 fit: 16 diff: 0 idpos: 0 |
| position: 1 fit: 14 diff: 0 idpos: 0 |
| position: 25 fit: 13 diff: 0 idpos: 0 |
| position: 23 fit: 12 diff: 0 idpos: 0 |
| position: 7 fit: 11 diff: 0 idpos: 0 |
+----------------------------------------------+
The first pair of columns (positon) contains the relative position of the
alignments of the two genomes. 0 indicates that the alignment occurred with
the first instruction of the two genomes together, -1 indicates that the first
instruction of the genome is aligned with the second instructions of the probe,
1 indicates that the first instruction of the probe is aligned with the
second instruction of the genome.
The second pair of columns (fit) contains the goodness of fit, as the
number of instructions that matched between the genome and probe in that
alignment. In this example, the probe is 45 instructions long, so a match
of 44 indicates that only one instruction is diferent between the probe and
genome.
The third pair of columns (diff) indicates a difference in length
resulting from an insertion (positive) or deletion (negative).
The fourth pair of columns (idpos) indicates the position of the
insertion of deletion.
When this window appears, you examine the alignments to decide how many
you want to use. In this case, there is only one really good alignment, so
we will use one. Now hit Esc, and another window will appear that looks
like this:
+number of matches to use-----+
| number of matches = 1 |
+-----------------------------+
You either accept the suggested value (1) or change it, the hit
Ctrl-Enter, and the alignments will be displayed in two windows that look
like this:
+instruction list--------------------------------------------------------------+
| 0:nop_0 1:nop_1 2:or1 3:shl 4:zero 5:if_cz 6:sub_ab 7:sub_ac |
| 8:inc_a 9:inc_b a:dec_c b:inc_c c:pushax d:pushbx e:pushcx f:pushdx |
| g:pop_ax h:pop_bx i:pop_cx j:pop_dx k:jmp l:jmpb m:call n:ret |
| o:mov_cd p:mov_ab q:moviab r:adr s:adrb t:adrf u:mal v:divide |
+------------------------------------------------------------------------------+
+genome-to-probe match: genome (top) - 0080aaa probe - 0045aaa ------------+
| 11114233os00007pt0001861101um0011vk001051100cde1010qa5k010089k010151011ihgn1 |
| 11114233os00007pt0001861101um0011vk001051110c |
| |
| 1105 |
| |
+------------------------------------------------------------------------------+
The highlighting is not indicated above, but it indicates where the two
genomes do not match.
====== PREPARE - FRAGMENT ===================================================
If you want to display a portion of a long run, you may edit the long
run using the "Prepare - Fragment" option from the Beagle menu, or the
stand-alone fragment utility. This will produce an output file which may
be read by itself, or you may produce several fragments, and then concatenate
them together in order to produce an edited version of a longer run. The
edited fragment(s) resulting from this process MUST be used as the input file
operated on by the "Prepare - Run Info" option to produce the run_info files
read by the Bars and Trace displays. Beware that if the fragments begin or
end at the same time that the "update" attempts to create a new list, very bad
interactions can result. Just be sure you don't try to fragment and update at
the same time (if you use the default update frequency of 100, don't break
your fragments at 100 million marks).
select the Prepare option
then select the Fragment option
Selecting the "Prepare - Fragment" option will produce a window that
looks like this:
+fragment----------------------------------+
| directory = c:\tierra\td |
| input file = break.1 |
| output file = fragment.run |
| start time = 0 |
| stop time = 1 |
+------------------------------------------+
Within this window, use the cursor key to move to an option, then type
in your choice. When you have all the options as you want them, use Ctrl-Enter
to activate the "Prepare - Fragment" process. Use the Escape key to exit from
the window.
An explanation of these "Prepare - Fragment" options follows:
directory = c:\tierra\td
This is the path to the file containing the birth and death records
output by the Tierra program (the break.X files).
input file = break.1
This is the name of the file containing the birth and death records
output by the Tierra program. In long runs, a series of these files may be
produced, with the names break.1, break.2, break.3, ..., break.X. The
Prepare - Fragment program will read each of them in turn, if you specify the
name of the first one.
output file = fragment.run
This is the name of the fragmentary output file that will be produced.
start time = 0
This is the start time of the fragment that you wish to produce, in
millions of instructions.
stop time = 1
This is the stop time of the fragment that you wish to produce, in
millions of instructions. Be sure the start and stop times do not coincide
with update times. The stop time must be greater than the start time.
The "Prepare - Fragment" option uses a lot of memory. On long runs,
it may run out of memory. If this happens, you should use the stand-alone
fragment tool. It takes the same input parameters, but by not being bundled
with the rest of the Beagle tools, it has a lot more memory to spare. Just
type fragment the DOS prompt.